TM 9-4520-258-14
5-7.
FRAME ASSEMBLY- continued.
WARNING
Contact with hot components can cause burns. Allow unit to cool down before attempting
service/inspection/maintenance activity.
NOTE
Disassemble only to the level required to make repairs.
Insulation should only be removed when necessary to gain access to another part/component or
replacement is necessary.
a.
Disassembly (Refer to 5-22)
(1)
Remove four screws (1), four lockwashers (2), four flat washers (3) and fuel drain cover (4).
(2)
Remove gasket (5) from fuel drain cover (4).
(3)
Remove eight rivets (6), eight flat washers (7) and fuel drain ring (8).
(4)
Remove locknut (9), preformed packing (10) and fitting (11). Discard packing.
Figure 5-22. Frame Assembly
5-37
