TM 9-4520-258-14
5-6.
HEAT EXCHANGER ASSEMBLY - continued.
f.
Installation (Refer to Figure 5-18)
WARNING
Edges of sheet metal can be sharp and cause injury. Gloves should be worn when handling the
heat exchanger.
NOTE
Two individuals are required to install the heat exchanger assembly.
(1)
Lift the heat exchanger assembly (1) into the unit through the rear.
(2)
Apply anti-seize compound (Item 3, App E) to screw (2). Align the top of heat exchanger (1) with the
tab on brace (3), install flat washer (4), lockwasher (5) and screw (2). Hand tighten only.
Figure 5-18. Heat Exchanger, Installation
5-32
