TM 9-4520-258-14
5-6.
HEAT EXCHANGER ASSEMBLY - continued.
e.
Assembly - continued (Refer to Figure 5-17)
(5)
Slide mounting ring (1) in end of heat exchanger shell (2), position the large hole in the ring towards
the bottom of the shell.
(6)
Install three brackets (3) between heat exchanger (4), heat exchanger shell (2) and mounting ring (1),
and secure each with four flat washers (5), two screws (6), two lockwashers (7) and two nuts (8).
Figure 5-17. Heat Exchanger, Assembly
5-31
