TM 9-4520-258-14
4-6. SERVICE UPON RECEIPT OF MATERIAL- continued.
b.
Checking unpacked equipment.
(1)
Inspect the equipment for damage incurred during shipment. If the shipment has been damaged,
report the damage on SF 364, Report of Discrepancy.
(2)
Check the equipment against the packing slip to see if the shipment is complete. Report all
discrepancies in accordance with the instructions in DA Pam 738-750 or DA Pam 738-751 as
applicable.
4-7. INSTALLATION INSTRUCTIONS.
a.
Assembly of Equipment (Refer to Figure 4-3)
(1)
Open the right side front door (1) and right side rear door (2).
(2)
Loosen two thumb screws (3) and remove the exhaust elbow (4) and external fuel hose (5). Close the
right side front door (1).
(3)
Remove the remote thermostat assembly (6), Close the right side rear door (2).
(4)
Remove the dust cap (7) from remote thermostat assembly (6).
(5)
Remove the remote thermostat connection cap (8) and connect remote thermostat assembly (6) to
connection (9).
Figure 4-3. Assembly of Equipment (Sheet 1 of 2 )
4-6
