TM 9-4520-258-14
4-7. INSTALLATION INSTRUCTIONS - continued.
a.
Assembly of Equipment - continued. (Refer to Figure 4-3)
(7)
Open the exhaust pipe storage door (11) and remove the exhaust pipe (12). Close the exhaust pipe
storage door (11).
(8)
Remove four screws (13) and exhaust cover plate (14).
(9)
Position the exhaust elbow (15) over the exhaust port (16).
(10)
Install exhaust cover plate (14) and four screws (13).
(11)
Install the exhaust pipe (12) on the exhaust elbow 115).
Figure 4-3. Assembly of Equipment (Sheet 2 of 2 )
4-7
