TM 9-4520-258-14
4-7. INSTALLATION INSTRUCTIONS- continued.
b.
Installation Instructions - continued. (Refer to Figure 4-6)
(6)
For connection of the power cable adapter cord (1) proceed as follows:
(a)
Loosen three screws (2) on the power source distribution panel (3).
NOTE
Adapter is designed to attach to a 120 volts, 50/60 hertz, single-phase grounded screw lug type
power source.
(b)
Connect black wire (4) to power source connection and tighten screw (2).
(c)
Connect white wire (5) to power source connection and tighten screw (2).
(d)
Connect green wire (6) to power source ground connection and tighten screw (2).
Figure 4-6. Power Cable Adapter Cord
4-11