TM 9-4520-271-14
0017 00
LUBRICATION INSTRUCTIONS
These lubrication instructions are for unit (O) maintenance. Refer to Table 2 for lubricant of ASH wheels. Lubrication
intervals (on-condition or hard time) are based on normal operation. Lubricate more frequently during constant use and less
during inactive periods. The man-hour specified is the time you need to do all the services prescribed for a particular
interval. Use the correct grade of lubricant for the seasonal temperature expected.
Lubrication interval and symbol: A = Annually or as required.
Before you start your lubrication:
ALWAYS
NEVER
1.
Clean grease fitting before lubrication.
1.
Use wrong type/grade grease.
2.
After lubrication, wipe off excessive grease
2.
Use too much lubricant.
from fittings to prevent buildup of dirt
Table 2. Lubricant for Wheels.
NOMENCLATURE:
TEMPERATURE RANGE
LUBRICANT
CAPACITY
INTERVAL
MAN-HOUR
Grease Fittings:
As required.
A
0.5
-60F to 100F (-51C to 38C)
END OF WORK PACKAGE
0017 00-17/18 blank