TM 9-4520-271-14
0027 00
INSTALLATION
1.
Install four screws (16), eight washers (13), lens (15), bracket (14), four lockwashers (12), and nuts (11).
NOTE
Ensure that gage face is readable and straight when standing in front of the control box.
2.
Install gage (10), bracket (9), four washers (8), lockwashers (7), and nuts (6).
3.
Install bracket (5), rotate 45 degrees (800 mils), and tighten two setscrews (4).
4.
Install reducer (3), male connector (2), and tube assembly (1).
END OF WORK PACKAGE
0027 00-3/4 blank
