TM 9-4520-271-14
0035 00
DISASSEMBLY
1.
Tag and disconnect two wires (1) from capacitor (2).
2.
Remove four screws (3), lockwashers (4), washers (5), and capacitor assembly (6). Discard lockwashers.
3.
Remove two screws (7), lockwashers (8), and bracket (9) from lid (10). Discard lockwashers.
4.
Remove capacitor (11) and gasket (12).
5.
Remove EMI gasket (13) and gasket (14) from lid (10).
6.
Drill out two rivnuts (15) from bracket (9).
7.
Tag two wires and cut away wire splices (16).
8.
Remove two braided shields (17) from wires as shown.
9.
Remove nut (18), lockwasher (19), two washers (20), ground wire (21), screw (22), and ground wire (23).
10. Remove ignition transformer (24) from mounting plate (25).
11. Remove screw (26) and ground wire (21) from ignition transformer (24).
12. Cut away two insulation sleevings (27) and remove high-tension leads (28) from ignition transformer (24).
13. Remove two hollow studs (29) from high-tension leads (28).
14. Remove gasket (30) from mounting plate (25).
15. Remove two screws (31), lockwashers (32), braided shield (17), and Radio Frequency (RF) filter (33).
16. Remove grommet (34) from mounting plate (25).
17. Drill out six rivnuts (35) from mounting plate (25).
0035 00-3