TM 9-4520-271-14
0035 00
INSTALLATION
1.
Carefully guide two high-tension leads (8) into heat exchanger shell (17) and install ignition transformer assembly (16).
2.
Position ignition transformer assembly (16) and install with two screws (15), four washers (14), two lockwashers (13)
(item 27, WP 0062 00), and two nuts (12).
3.
Connect two wires (10) onto capacitor (11). Remove wire marker tags.
4.
Install wire ties as required.
5.
Twist two high-tension leads (8) together three turns and connect to electrodes (9).
6.
Install gasket (7) onto cover plate (6).
7.
Install cover plate (6), braided wire (5), thermostat bracket assembly (4), eight washers (3), lockwashers (2) (item 33,
0035 00-6
