TM 9-4520-271-14
UNIT MAINTENANCE INSTRUCTIONS
ARMY SPACE HEATER H-140
NSN 4520-01-477-0568
BURNER ASSEMBLY
REMOVAL, INSPECTION, REPAIR, INSTALLATION
INITIAL SETUP:
Materials/Parts
Test Equipment
Cleaning compound solvent (item 3, WP 0061 00)
None
Lockwasher (item 33, WP 0062 00)
Sealing compound (item 17, WP 0061 00)
Tools and Special Tools
Wiping rag (item 14, WP 0061 00)
Automotive general mechanic's tool kit
(item 10, WP 0058 00)
Equipment Condition
ASH disconnected from power source
Personnel Required
One
Supply duct air screen removed (WP 0025 00)
Supply duct cover assembly removed (WP 0024 00)
References
FM 10-67-1
WARNING
Contact with hot components can cause burns. Allow ASH to cool down before attempting service,
inspection, or maintenance activity.
FOR FUEL SPILLS, REFER TO FM 10-67-1, CONCEPTS AND EQUIPMENT OF PETROLEUM
OPERATIONS.
Fuel is flammable and toxic to eyes, skin, and respiratory tract. Skin/eye protection is required. Avoid
repeated/prolonged contact. Use only in well-ventilated areas. Keep away from open flames or other
sources of ignition. Post FUEL FLAMMABLE/NO SMOKING signs around the area. Be sure a fire
extinguisher is available.
Fuel on clothing can be fatal if ignited by a static discharge. If fuel gets on clothes, leave the refueling area
as soon as possible, remove clothes, and wash skin with warm, soapy water before getting dressed.
Spilled fuel creates a flammable, vapor-air mixture and fire can take place. Improper positioning of
external fuel source can cause fuel tank to overflow. Stop refueling immediately if fuel spill occurs.
0036 00-1
