TM 9-4520-271-14
0038 00
DISASSEMBLY - Continued
Carbon Monoxide Detector CO2 Removal
1.
Remove front panel assembly (WP 0038 00-1).
2.
Remove four nuts (1), washers (2), and screws (3). Gently move remote controller S6 (4) away from front panel
assembly (5) for access to wires (6).
3.
Tag and disconnect four wires (6) from terminal board TB4 (7) terminals 6, 7, and 8.
4.
Remove two screws (8), lockwashers (9), washers (10), and cover (11).
5.
Carefully remove carbon monoxide detector CO2 (12) while guiding individual wires (6) through grommet (13).
Remove grommet only if damaged.
6.
Remove bracket (14) from wires (6).
7.
Drill out rivnuts (15) if damaged.
