TM 9-4520-271-14
0038 00
DISASSEMBLY - Continued
Data Plate and Chain Removal
1.
Remove front panel assembly (WP 0038 00-1).
2.
Remove mode switch S8 (WP 0038 00-3).
3.
Remove thermostat control R1 (WP 0038 00-4).
4.
Remove carbon monoxide detector CO2 (WP 0038 00-5).
5.
Remove remote controller S6 and temperature sensor TP-1 (WP 0038 00-6).
6.
Remove CARBON MONOXIDE ALARM (WP 0038 00-7).
7.
Remove POWER indicator light DS6 and CARBON MONOXIDE ALARMS LIGHT DS5 (WP 0038 00-8).
8.
Remove EMI jumper and terminal board TB4 (WP 0038 00-9).
9.
Drill out four rivets (1) and remove data plate (2) from front panel (3).
10. Drill out six rivets (4) and remove data plate (5) from enclosure (6).
11. Open link and remove chain (7) from enclosure (6).
0038 00-10
