TM 9-4520-271-14
0038 00
REPAIR
Continued
NOTE
Hold the connector plug securely while turning the clamp to prevent twisting of wires.
m. Hold connector plug (2) securely and slide sleeve (7) and clamp (6) onto cable (8) and screw clamp (6) onto
connector plug (2).
n. Position two saddles (5) on clamp (6) and cover assembly chain (4) on saddle and install with two screws (3).
o. Screw cover (1) into connector plug (2).
p. Repair of opposite end of cable is limited to replacement of terminal lugs (11).
0038 00-12
