TM 9-4520-271-14
0051 00
DISASSEMBLY
Continued
6.
Drill out six rivets (9) and remove hinge (10).
7.
Drill out eight rivets (11) and remove control panel plate (12).
8.
Remove two retaining rings (13), stud assemblies (14), and grommets (15).
9.
Remove two gaskets (16) and two gaskets (17).
INSPECTION
1.
Inspect all parts for wear, cracks, corrosion, and bent or broken terminals.
2.
Inspect all hardware for stripped or damaged threads.
REPAIR
Repair is limited to replacement of defective parts.
ASSEMBLY
1.
Install two gaskets (17) (item 87, WP 0047 00) and two gaskets (16) (item 86, WP 0047 00).
2.
Install two grommets (15), stud assemblies (14), and retaining rings (13).
3.
Install control panel plate (12) with eight rivets (11) (item 4, WP 0062 00).
4.
Position hinge (10) and secure with six rivets (9) (item 4, WP 0062 00).
0051 00-4
