TM 9-4520-271-14
0051 00
INSTALLATION
1.
Install two gaskets (14) (item 84, WP 0047 00) and two gaskets (13) (item 85, WP 0047 00). Trim gaskets as required.
2.
Seal edges where gaskets (14 and 13) meet with sealing compound.
3.
Install control box assembly (12) with 12 washers (11), lockwashers (10), and screws (9).
4.
Install bar (8) with washer (7), lockwasher (6), and screw (5).
NOTE
Hose must be routed under the air inlet of the combustion air fan assembly.
5.
Install hose (4) and tighten two clamps (3).
6.
Close right side rear door (2) and control box cover (1).
END OF WORK PACKAGE
0051 00-6
