TM 9-4520-271-14
0055 00
ASSEMBLY
WARNING
Rubber adhesive is flammable. Keep away from open flames or other sources of ignition. Avoid breathing
fumes from adhesive. Good general ventilation is normally adequate. Avoid skin contact with adhesive.
NOTE
Install insulation with rubber adhesive, except for items 3, 5 thru 11, and 31 in WP 0047 00, Table 1.
1.
Apply rubber adhesive to rough side of insulation and to mating surface and install insulation.
2.
Install wheel pivot (22) with four screws (21), washers (20), lockwashers (19) (item 29, WP 0062 00), and nuts (18).
3.
Install two rivets (17) to secure each receptacle (16).
4.
Install rivnuts (15 thru 12) (items 38, 1, 12, and 13, WP 0062 00) as required.
5.
Install grommet (11) with sealing compound applied to edge of hole.
6.
Install support (10) with four washers (9), two screws (8), lockwashers (7) (item 28, WP 0062 00), and nuts (6).
0055 00-5
