TM 9-4520-271-14
0055 00
INITIAL SETUP
Continued:
Equipment Condition Continued
Equipment Condition Continued
Supply and return duct air screens removed
Heat exchanger assembly removed (WP 0037 00)
Ignition transformer assembly removed
Supply and return duct cover assemblies removed
Jack assembly removed (WP 0042 00)
Thermostat assembly removed (WP 0034 00)
Power cable assembly removed (WP 0039 00)
Top panel assembly removed (WP 0021 00)
Rear panel assembly removed (WP 0022 00)
Ventilation air fan and motor assembly removed
Remote control box removed (WP 0038 00)
Side rear door and side front door assemblies
Wheel assemblies removed (WP 0043 00)
removed (WP 0023 00)
Supply and return air hose assemblies removed
DISASSEMBLY
NOTE
Insulation should only be removed when necessary to gain access to another part/component or when
replacement is necessary.
1.
Remove four screws (1), lockwashers (2), washers (3), and fuel drain cover (4). Discard lockwashers.
2.
Remove gasket (5) from fuel drain cover (4).
0055 00-2
