TM 9-4520-272-14&P
0026 00
5. Remove the cable (2) from the end of the shutdown solenoid (11) by holding the cable end stationary
while rotating the shutdown solenoid shaft (12).
6. Remove defective cable (2).
7. Install a new cable by threading through the grommets on the engine cooling air inlet (8) and the
engine mounting plate (6).
8. Install end of cable to shutdown solenoid shaft (12).
9. Install engine cooling air inlet (8) with four screws (7) and lockwashers removed earlier.
10. Secure cable to engine mounting plate (6) with nut (4) and lockwasher (5) removed earlier.
11. Install end of cable to engine throttle (3). Secure with new cotter pin (1).
5
4
1
3
2
10
12
7
8
9
11
0026 00-2
