TM 9-4520-272-14&P
FIELD (UNIT) MAINTENANCE
LARGE CAPACITY FIELD HEATER
NSN 4520-01-500-1534
ENGINE SHUTDOWN SOLENOID AND CABLE
SERVICE, REPLACE
INITIAL SETUP:
Tools
Personnel Required
Tool Kit, General Mechanics (Item 1, WP 0092
MOS 63J or 52C
Materials/Parts
Equipment Condition
Pin, cotter (Item 30, WP 0119 00)
Heater shut down and cool (WP 0005 00)
Lubricant, silicone (Item 3, WP 0119 00)
Main battery switch OFF and handle removed.
SERVICE
To lubricate the engine shutdown cable, spray silicon lubricant into the end of the cable housing at both
the solenoid end (1) and engine end (2).
1
2
REPLACE CABLE
1. Remove the cotter pin (1) that secures the end of the shutdown cable (2) and disengage the cable
end from the engine throttle (3). Discard cotter pin.
2. Remove the nut (4) and lockwasher (5) that secure the cable housing (2) to the engine mounting
plate (6).
3. Remove the four screws (7) and lockwashers that secure the engine cooling air inlet (8) and set
aside.
4. Remove the nut (9) and lockwasher (10) that secure the cable housing to the engine cooling air inlet
(8).
0026 00-1
