TM 9-4931-381-14&P-2
F R A M E 5 1
Install Keyboard Assembly:
1.
2.
3.
GO
NOTE
Use this task to install either function or numeric
keyboard assembly. Numeric keyboard assembly (1) is
shown.
Read paragraph 2-4 on soldering wires before doing any
work.
Put eight posts (2) on keyboard (1) into holes on panel assembly (3).
Screw on and tighten eight hexagon plain nuts (4), new lockwashers (5), and flat
washers (6) with wrench.
Solder wires (7) to terminals (8) and jumper wire (9) between terminals B (10) and H
(11); refer to wiring chart.
GTO FRAME 52
Volume IV
2-107
Para. 2-6, Task 24
