TM 9-4931-381-14&P-2
F R A M E 55
Install Panel Assembly:
CAUTION
1.
2.
3.
4.
5.
6.
Weight of panel (1) can damage internal wiring. When
putting in receptacle connectors (2), panel (1) must be
supported to avoid damage towering.
Soldier A,
Soldier B: Carefuly lower chassis assembly (3) down to rest on backside.
Solder A: Put preformed packing (4) on 12 connectors (2).
Solder A,
Solder B: Lift and turn panel (1) and carefully set panel (1) on chassis assembly (3)
NOTE
Repeat steps 4 and 5 for each of 12 connectors (2).
Soldier B is no longer needed in this task.
Put connector (2) through hole in panel (1).
Using jamnut wrench, put ring (5) and jamnut (6) on connectors (2).
Put lacing wire (7) through jamnut (6) with pliers.
GO TO FRAME 56
Volume IV
Para. 2-6, Task 26
2 - 1 1 3
