TM 9-4931-381-14&P-2
FRAME 58
Install Panel Assembly (Continued):
1.
Put electrical tiedown strap (1) on harness (2).
2.
Put connector body plug A1P2 (3) on receptacle W16J1 (4) and turn handle (5) one-
quarter turn clockwise to lock plug (3) on receptacle (4).
3.
Put connector A1P3 (6) on receptacle W14J1 (7). Put connector A1P1 (8) on
receptacle W17J1 (9). Put connector A1P4 (10) on receptacle W13J2 (11).
4.
Screw in and tighten two electrical polarizing keys ( 12) on each of three connector
A1P3 (6), A1P1 (8), and A1P4 (10) with flat tip screwdriver.
Follow-on Maintenance:
1. InstalI thermal system test controller; refer to para. 2-5, task 8.
2. Install thermal system test controller case cover; refer to volume 1, para. 4-18.
END OF PANEL ASSEMBLY A1 MAINTENANCE
2-116
Volume IV
Pam. 2-6, Task 26
