T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
FRAME 57
Install Panel Assembly (Continued):
1.
2.
3.
4.
GO
CAUTION
Wiring can be damaged if tangled on chassis (1). To avoid
damage to wiring, use care when lining up panel (2) with
chassis (1).
Line up holes in panel (2) with holes in chassis (1).
Screw in and tighten two machine screws (3) and washers (4) to chassis angle (5) on
each side of panel (2).
Screw in and tighten ten screws (6), Iockwashers (7), and washers (8) near bottom of
panel (2) with cross tip screwdriver.
Screw in and tighten eight machine screws (9), Iockwashers ( 10), and flat washers
(11) near handles (12) with cross tip screwdriver.
TO FRAME 58
Volume IV
Para. 2-6, Task 26
2-115