T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 32
Install Circuit Card:
CAUTION
Touching circuit card components can damage components.
Hold card assemblies by edges at all times. Do not flex or
twist card.
NOTE
Use this procedure to install either circuit card assemblies
A1 or A2. Circuit card A1 (1) is shown.
1.
Gently slide circuit card assembly (1) into slot (2). Put thumbs on corners of card (1)
and push in until card (1) seats.
2.
Tighten two screws (3) with key.
Follow-on Maintenance:
1. Install cover; refer to task 17
2. Install IDU assembly A2; refer to task 18
3. Install thermal system test controller; refer to para. 2-5, task 8.
4. install thermal system test controlier case cover; refer to volume 1, para. 4-18.
TASK 16 ENDS HERE
Volume IV
Para. 2-8, Task 16
2-209
