T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
F R A M E6
Remove Fan (Continued):
1.
2.
3.
4.
Unscrew and take out four machine screws (1), 12 flat washers (2), four nonmetallic
grommets (3), and four self-locking nuts (4) with offset screwdriver and wrench.
Remove blower mount (5) from cooling fan assembly (6).
Look at blower mount (5), fiIter (7), and cover (8) for cracks or dents. If bad,
replace case assembly (9). If OK, set aside for later use.
Look at electrical wire (10) and receptacle connector P1 (11) for damage. If bad,
repair cooling interconnect fan assembly W18 (9); refer to task 4. If OK, set aside
for later use.
Look at fan (6) for damage.
If bad, replace fan (6); refer to task 5. If OK, set aside
for later use.
Follow-on Maintenance:
NOTE: To install cooling interconnect fan assembly W18, refer to task 7.
TASK 3 ENDS HERE
Volume IV
Para. 2-5, Task 3
2-13
