T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 2
Remove Connector (Continued):
1.
Takeout two machine screws (1), two lockwashers (2) four flat washers (3), and two
hexagon plain nuts (4) with cross tip screwdriver No. 1 and 7/32-inch wrench. Get
rid of Iockwashers (2).
2. Move connector W16J1 (5) away from under side of bracket (6).
3. Unscrew and take out six machine screws (7) and flat washers (8) from bracket (6).
4.
Move bracket (9) away from under side of bracket (6).
5.
Take out machine screw (10) and flat washer (11) with cross tip screwdriver No. 2.
6.
Take out four machine screws (12) with cross tip screwdriver No. 2.
Follow-on Maintenance:
NOTE: To instalI front panel connectors bracket, refer to task 3.
TASK 1 ENDS HERE
Volume IV
2-324
Para. 2-13, Task 1
