TM 9-4931-381-14&P-2
FRAME 1
Repair W1 through W9 Cables:
NOTE
l
Use this task to repair any of W1 through W9 cables.
W1 cable is shown here.
l
Read paragraph 3-4 on repairing cables before doing
any work.
1.
Take protective cover (1) off of electrical connector plug (2). Look at cover (1) for
cracks. If bad, turn in cover (1). If OK, set aside for later use.
2.
Look at connectors (2) for loose, bent, broken or missing contacts (3). If bad, take
out contacts (3) with extract tool and get rid of contacts (3). Put in new contacts
(3) with insert tool. If OK, put cover (1) on connector (2).
Follow-on Maintenance:
1. Install W1 through W9 cables in accessory storage case; refer to volume 1,
para. 4-18.
2. InstalI accessory storage assembly cover; refer to volume 1, para. 4-18.
TASK 1 ENDS HERE
Volume IV
Para. 3-6, Task 1
Change 1 3-11
