TM 9-4931-381-14&P-2
TASK 2. Repair W10 Cable.
ApplicabiIity: AlI models
Common Tools:
Gun, thermal
Knife, craftman’s
Multi meter, digital
Pliers, diagonal cutting
Pliers, needle nose
Pliers, straight nose
Rule, machinist’s, 6-inch
Screwdriver, cross tip, No. 2
Screwdriver, flat tip, 3/16-inch
Set, soldering and resoldering
Special Tools:
Maintenance Kit, electrical connector repair, 12285360
Supplies:
NOTE: Expendable supplies are defined in volume 1, appendix C.
Brush, acid swabbing (Item 8)
Connector, plug, electrical (96906) MS3126F14-19S
Contact, electrical (81349) MS39029/56-348 (as required)
Cover, protective (05593) 100860
Cover, protective (05593) 100861
Cover, protective (19200) 12301880
Decal, fuse cannister (19200) 9377380
Fuse, cartridge (81349) F03A250V10A (as required)
Fuseholder (19200) 9377397
Grease, KRYTOX (Item 14)
Isopropyl alcohol (Item 17)
Label, caution (19200) 9377391
Lockwasher (96906) MS35338-136 (as required)
Pencil, writing (Item 19)
Rag, wiping (Item 24)
Sleeving, insulation (80205) M23053/5-109-0 (as required)
SIeeving, insulation (81349) M23053/5-111-0 (as required)
Solder (Item 29)
Tag, marker (Item 34) (as required)
Terminal Lug (96906) MS25036-154 (as required)
Terminal lug (96906) MS77068-2 (as required)
Personnel: One
Equipment Condition:
Accessory storage assembly on a clean work surface.
Preliminary Procedures:
1. Remove accessory storage assembly cover; refer to volume 1, para. 4-17.
2. Remove W10 cable from accessory storage assembly; refer to volume 1,
para. 4-17
3-12 Change 1
Volume IV
Para. 3-6, Task 2
