TM 9-4931-381-14&P-2
FRAME 3
Repair Terminal
1.
2.
3.
4.
5.
GO
Lug:
NOTE
Read paragraph 3-4 on tagging and soldering wires
before doing any work.
Use this task to repair terminals on any of three sets of
W 10 cable leads.
If all terminals are OK, GO TO FRAME 4.
Look at wires (1) for loose, bent, broken or missing terminals (2). If bad, tag and cut
wires (1) with diagonal cutting pliers near bad terminal (2). Get rid of terminal (2).
Using stripping tool, strip wires (1) to fit in new terminal MS25036-154 (3).
Insert stripped wires (1) into new terminal (3).
Fasten terminal (3) to wires (1) with crimping tool.
Solder ends of wires (1) to terminal (3).
TO FRAME 4
Volume IV
3-14 Change 1
Para. 3-6, Task 2
