T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 9
Install Base:
1.
Put two Iegs (1) with bracket (2) under base (3) and screw in and tighten four
machine screws (4), new Iockwashers (5), and flat washers (6) with screwdriver.
2.
Screw in and tighten two machine screws (7), new Iockwashers (8), and flat washers
(9) in bracket (2) with screwdriver.
3.
Put two legs (10) under base (3) and screw in and tighten four screws (11), new
Iockwashers (12), and washers (13) with screwdriver.
Follow-on Maintenance:
1. Install PCU holding fixture in accessory storage assembly; refer to volume 1,
para. 4-18.
2. lnstall accessory storage assembly cover; refer to volume 1, para. 4-18.
TASK 7 ENDS HERE
3-46
Volume IV
Para. 3-7, Tusk 7
