T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 7
Repair Elevation Adjustment Assembly (Continued):
1.
2.
3.
4.
NOTE
Do steps 1 and 2 for installing knob (1) with one set screw
(2). DO steps 3 and 4 for installing knob (1) with two
set screws (3).
Put knob (1) on shaft (4). Screw in and tighten screw (2) with screwdriver.
Slide shaft (4) through block (5) and screw into block (6). Go to follow-on
maintenance.
Put knob (1) on shaft (4). Screw in and tighten two screws (3) with key.
Slide shaft (4) through block (5) and screw into block (6).
Follow-on Maintenance:
NOTE: To install elevation adjustment assembly, refer to task 9.
TASK 6 ENDS HERE
Volume IV
Para. 4-5, Task 6
4-17
