T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 8
Remove Riser Assemblies:
1.
2.
3.
4.
5.
Unscrew and take out six cap socket screws (1), lockwashers (2), and flat washers (3)
from riser assembly (4) with key. Get rid of Iockwashers (2).
Look at riser assembly (4) for cracks and bends. If bad, do tasks 1 through 4 and
turn in riser assembly (4). If OK, set aside for later use.
Unscrew and takeout six screws (5), lockwashers (6), and washers (7) from riser
assembly (8) With key. Get rid of lockwashers (6).
Look at riser assembly (8) for cracks and bends. If bad, do tasks 1 through 4 and
turn in riser assembly (8). If OK, set aside for later use.
Turn in base plate (9).
GO TO FRAME 9
Volume IV
Para. 4-5, Task 7
4-19
