TM 9-4931-381-14~P-2
FRAME 12
Install Plate:
NOTE
Use this task to install either of two stationary plates (1).
Only one stationary plate (1) is shown.
1.
Line up holes in stationary plate (1) with holes in riser assembly (2).
2. Apply sealing compound to four machine screws (3) with screwdriver.
3.
Screw in and tighten four screws (3) with screwdriver.
Follow-on Maintenance:
Install pin, revolving plate, and spindle assembly, refer to task 11.
TASK 10 ENDS HERE
4-26
Volume IV
Para. 4-5, Task 10
