TM 9-4931-381-14&P-2
FRAME 1
Remove Front and Rear Brackets:
1.
2.
3.
4.
5.
GO
Unscrew and take out two machine screws (1), Iockwashers (2), and fIat washers (3)
from front bracket (4) with screwdriver. Get rid of lockwashers (2).
Look at front bracket (4) for cracks and bends. lf bad, turn in front bracket (4). If
OK, set aside for later use.
Unscrew and take out two screws (5), Iockwashers (6), and washers (7) from rear
bracket (8) with screwdriver. Get rid of Iockwashers (6).
Look at rear bracket (8) for cracks and dents. If bad, turn in rear bracket (8) .If
OK, set aside for later use.
Look at base plate (9) for cracks and dents. If bad, turn in base plate (9). If OK, set
aside for later use.
TO FRAME 2
Volume IV
4-30
Para. 4-6, Task 1
