Section II. PREVENTIVE MAINTENANCE
recorded on DA Form 2404 (Equipment In-
3-3. General
spection and Maintenance Worksheet) as soon as
Preventive maintenance services are the minimum
possible.
inspections which are performed to insure that
defects may be discovered and corrected before
may result in serious damage to or failure of the
T h e preventive maintenance services listed in table
equipment. When defects are discovered during
o p e r a t i o n of the equipment, they must be corrected
formed by the operator on the heater with the
as soon as operation has ceased. If continued
Military standard engine. The services will be
o p e r a t i o n would result in damage to the equipment,
performed in the sequence in which they are
the defects must be corrected at once. All
numbered. The preventive maintenance services
deficiencies and shortcomings that are discovered
which must be performed on the MIL-STD model
and all corrective actions that are taken will be
1A08-3
engine
are
in
TM5-2805-256-12.
Section III. TROUBLESHOOTING
cannot be corrected by the operator must be
3-5. General
reported to the proper authority.
Troubleshooting is the process of locating and
correcting malfunctions that may occur under
Troubleshooting
Procedures
normal operating conditions. This section provides
The malfunctions and troubleshooting procedures
information useful in locating and correcting any
are shown in table 3-2 for the heater. For engine
u n s a t i s f a c t o r y operation or failure of the heater and
malfunction and troubleshooting see TM5-2805-
its components. Any operational trouble that
256-14.
Section IV. MAINTENANCE PROCEDURES
engine Model 1A08-3.
3-7. Engine Assembly
Refer
to
TM5-2805-256-14
to
service
the
military
