TM 10-4520-261-12&P
SPACE HEATER ARCTIC (SHA)
0005 00
OPERATION UNDER USUAL CONDITIONS
0005 00-15
Lower the left (5) and right (6) support arms so that each is
at a right angle to its attached leg. Place the tripod brace (7)
under the top bracket (8) of the stand and clip into position
over the front of the top bracket.
NOTE!
Make sure that the Fuel Can Gravity Feed Adapter is
fully seated and secured to avoid leaking.
Invert the fuel can with installed gravity feed adaptor (9) and
mount on the assembled fuel can stand so that the gravity
feed (10) adapter faces the ground. Slide the right support
arm (8) through the handle (11) of the fuel can. Wrap the left
support strap (12) over the bottom of the fuel can (9). Feed
the right support strap (13) through the fuel can handle (11),
up across the front of the fuel can body, and over the left
support strap (12). Secure the right strap (13) to the left
strap . The strap helps secure a partially filled fuel can to the
fuel stand during windy conditions.
5
6
7
8
9
10
8
11
12
13
7
8
