TM 10-7310-241-12&P
4-12.4 Change 1
4-10.1 REPLACING THE COVER ASSEMBLY FOR MODEL 471012 (Continued)
(1) Remove the four acorn nuts (1) and the four tooth washers (2) that secure the handle (3) and
the gasket retaining plate (4) to the lid (5).
(2) Remove the handle (3) and the gasket retaining plate (4) from the lid (5).
(3) Remove the lid gasket (6) from the lid (5).
h. Installing the Lid Gasket.
(1) Apply Loctite 242 or equivalent to the threads of the four gasket retaining plate studs (7), prior to
installing and tightening the four acorn nuts (1).
NOTE
When installing the lid gasket, ensure that the gasket fits tightly over
the manifold retainers, where they project from the interior surface of
the lid.
(2) Install the lid gasket (6) to the lid (5).
(3) Install the gasket retaining plate (4) and the handle (3) to the lid (5).
(4) Install the four tooth washers (2) and four acorn nuts (1) to secure the handle (3), and the
gasket retaining plate (4) to the lid (5).
i. Servicing the Lid. Clean the inside and outside of the lid with a solution of dishwashing detergent and warm
water. Use a soft cloth to avoid damage to the lid seal.
