TM 10-7310-241-12&P
4-14 Change 1
4-14. REPLACEMENT OF LATCH ASSEMBLY FOR MODEL RAK-15
This task covers:
a. Removal of Latch Assembly.
b. Installation of Latch Assembly.
INITIAL SETUP
Tools: Tool Kit, General Mechanics: Automotive (Appendix B, Section II, Item 1).
Parts/materials: None.
HWR Condition: Cover removed (Subparagraph 2-9a, steps (1) thru (5)).
Inner Container removed (Subparagraph 4-13a).
a. Removal of latch assembly.
(1) Operate unlocking catch (1) upwards to release the operating lever (2).
(2) Rotate operating lever (2) upwards to its full extent and hold in position.
(3) Remove and retain three mounting screws (3) securing latch assembly (4) to the main case (5).
(4) Remove latch assembly (4).
b. Installation of Latch Assembly.
(1) Rotate operating lever (2) upwards to its full extent and hold in position.
(2) Locate latch assembly (4) on the main case (5) and position it such that the three mounting holes
are correctly aligned.