TM 5-3895-377-13&P
(29) Install gasket (3) on head (2).
Blades of rotor are sharp. Wearing
gloves is recommended or injury to
personnel could occur.
NOTE
•
Aline teeth of rotor and idler
before installing
•
Aline matchmarks on head and
casing before installing.
(30) Install head (2) and six screws (1) in body (4).
Tighten screws to 24 lb-ft (33 N.m).
NOTE
Follow-on Maintenance: Install pump
(page 4-197).
END OF TASK
5-84
