TM 5-3895-377-13&P
NOTE
Aline
matchmarks
on
body
and
bracket before installing.
(4)
Install gasket (35), body (36), and eight screws
(33) on bracket (26). Torque to 24 lb-ft (33
N.m).
Blades of rotor are sharp. Wearing
gloves is recommended or injury to
personnel could occur.
(5)
Start the end of shaft (10) in bracket (26) and
turn from right to left slowly, pushing rotor into
casing.
(6)
Install rotor and shaft (10) in bracket (26).
NOTE
Install and seat each ring of packing
one at a time, staggering the ring
joints from one side of the shaft to
the other. Lubricate the packing
rings with oil, grease, or graphite to
aid assembly. A length of pipe or
tubing will help to install and seat
each packing ring.
(7)
Install packing retainer washer (32) and five packings (30) in packing chamber.
(8)
Apply grease to lantern ring (31).
{9)
Install lantern ring (31) and five packings (30) ensuring lantern ring (31) is positioned under the grease fitting (37).
5-80
