DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL
TOOLS AND EQUIPMENT
5-1 Tools and Equipment
engine. No special tools or equipment are authorized
for use in the maintenance described in this chapter.
The common tools that are used in field main-
tenance and in depot maintenance of this equipment
5-3 Maintenance Repair Parts
are authorized in the appropriate table of
The repair parts that are authorized for use in the
organization.
Direct Support and General Support Maintenance of
the heaters with the MIL-STD model 1A08-3
engines are listed in TM 5-2805-256-24P. Parts for
Reference RPSTL contained in TM 5-4520-224-24P
the heater are listed in TM 4520-224-24P.
for the heater and TM 5-2805-256-24P for the
Section II. TROUBLESHOOTING
5-4 General
This section contains troubleshooting information in
Malfunctions and troubleshooting procedures for the
tabular form to help in locating and correcting some
engine assembly are shown in TM 5-2805-256-14.
of the malfunctions that may develop in the heater.
Malfunctions and troubleshooting for the heater are
listed in Table 3-2 and Table 4-2.
Section III. GENERAL MAINTENANCE
5-6 General
or subsystem specified in the MAC (app B). Each
major assembly or subsystem so specified for direct
The following sections in this chapter are devoted to
support and general support maintenance is covered
applicable instructions for removal, disassembly, ad-
under its own section and the titles of these sections
justment, cleaning, inspection, repair, testing,
correspond to the MAC.
reassembly and installation of each major assembly
