TM 9-2540-205-24&P
FUEL REGULATOR VALVE - STEWART-WARNER 10560C24, 10560M
This task covers:
a. Removal
e. Assembly
b. Disassembly
f. Installation
c. Cleaning
g. Adjustment
d. Inspection/Replacement
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
63G
Equipment Condition
Materials/Parts
Ignition control removed (page 2-47)
Remove wire lead from thermostat to
Cylinder, graduated, 100cc capacity
terminal (page 2-55
Hose, rubber, 12-inch (two required)
Pan, drain
Parts Kit, valve
Rags, wiping (Item 5, Appendix C)
Sealant, silicon (Item 6, Appendix C)
Solvent, drycleaning (Item 8, Appendix C)
Stripper, wire
Tie wraps (two required) (Item 11, Appendix C)
Tool, crimping
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
NOTE
Tag all wires and terminals to aid during installation (page 2-3).
NOTE
Newer valves have different cover in which wire does not go through a hole.
1.
2.
3.
4.
5.
6.
Fuel tube (1) and tee (2)
Nut (3)
Fuel regulator valve (4)
Two tie wraps (5)
Terminal strip (6)
Screw assembly (7) and lead (8)
Overheat switch (9)
Nut assembly (1 O) and lead(11 )
Fuel regulator valve (4)
Three screw assemblies (13)
and heater (12)
Heater (12)
Fuel regulator valve (4)
a. Position drain pan to catch
fuel.
b. Loosen, drain and disconnect.
a. Remove.
b. Discard.
Unscrew and remove.
Unscrew and remove.
Unscrew and remove.
Remove.
3-74
