TM 9-2540-207-14&P
5.3.6
Burner Cartridge (continued)
Removal (continued)
Figure 5-3.10. New Burner Wick (left); 50% deteriorated Burner Wick (right)
!CAUTION!
Do NOT use any metallic objects to clean the Push Nut or the Fuel Shaft.
Compressed air jets and/or cleaning-spray (carburetor cleaner) are permitted. The
use-of a rifle bore cleaning brush is permitted. Gently wiping with a soft cloth is
permitted.
7.
Carefully remove any carbon deposits from the Burner components by gently scraping away the deposits taking
care not to damage the Fuel shaft and the Push Nut on the Fuel Shaft.
Figure 5-3.11. Burner Housing, Detail
5-38
