TM 9-2540-207-14&P
5.3.7
BURNER HOUSING
Figure 5-3.13. Burner Housing
Removal
1.
Remove Top Shell (ref. 5.1.2)
2.
Remove Bottom Shell (ref. 5.1.3)
3.
Remove Vent Fan Assembly (ref. 5.2.1)
4.
Remove Combustor Assembly (ref. 5.3.1)
5.
Using a 3/4" deep socket, remove Igniter Holder from the Burner Housing
6.
Using a #2 cross-tip screwdriver, remove three (3) screws holding the Burner Chamber to the Burner Housing.
7.
Remove the Burner Chamber (with Cartridge) from the Burner Housing.
Note: The Burner Wick located inside the Burner Cartridge is made from a fragile
metallic material. Take great care when handling the Burner Cartridge so as not to
damage the Burner Wicks.
Note: IF the wicks are greater than 50% deteriorated, replace the entire Burner
Cartridge (ref. Figure 5-3.10).
5-40