TM 9-2540-207-14&P
5.3.5
Burner Chamber (continued)
Cleaning
1.
Carefully remove any carbon deposits from the Burner components by gently scraping away the deposits taking
care not to damage the Fuel shaft and the Push Nut on the Fuel Shaft. Gently wiping carbon deposits from the
fuel shaft and the Push Nut is usually sufficient.
Figure 5-3.7. Burner Housing, Detail
Note: The Burner Wick located inside the Burner Cartridge is made from a fragile
metallic material. Take great care when handling the Burner Cartridge so as not to
damage the Burner Wicks. Note: IF the wicks are greater than 50% deteriorated,
replace the entire Burner Cartridge. (ref. Figure 5-3.10)
5-35
