TM 9-2540-207-14&P
5.3.2
FLAME TUBE
Figure 5-3.3. Flame Tube
Removal
1.
Remove Top Shell (ref. 5.1.2)
2.
Remove Bottom Shell (ref. 5.1.3)
3.
Remove Vent Fan Assembly (ref. 5.2.1)
4.
Remove Combustor Assembly (ref. 5.3.1)
5.
Pull Flame Tube from Heat Exchanger.
Installation
Note: When REPLACING the Flame Tube, the Burner Chamber MUST be replaced
also (ref. 5.3.5).
1.
Insert Flametube into Heat Exchanger.
2.
Install Combustor Assembly (ref. 5.3.1)
3.
Install Vent Fan Assembly (ref. 5.2.1)
4.
Install Bottom Shell (ref. 5.1.3)
5.
Install Top Shell (ref. 5.1.2)
5-30
