TM 9-2540-207-14&P
5.5.3
FUEL PUMP
Figure 5-5.6. Fuel Pump
Removal
1.
Remove Top Cover (ref. 5.1.1)
2.
Disconnect Fuel Pump connector (J4) from the Power Wiring Harness.
Note: The connector is released by pressing, lifting the locking tab and gently
pulling apart the two halves.
3.
Disconnect the Two (2) fuel lines from the Burner Fan Plate Assembly fuel fittings taking care to avoid fuel spills.
4.
Using a #2 cross-tip screwdriver, unscrew the two (2) screws and star washers which hold the Fuel Pump onto
the Top Housing.
Note: The Fuel Pump shares a common machine screw with the Power Main
Capacitor (C2) clamp. After the machine screw is removed, slide the Pump away
from the Main Capacitor clamp.
5.
Remove Fuel Pump.
5-56
