TM 9-4520-251-14
4-62 INFORMATION PLATES
This task covers:
a. Inspection
b. Service
c. Replacement
Tools
Materials/Parts
Tool kit, service, refrigeration unit
Dry cleaning solvent (Item 15,
(Appendix B, Section Ill, Item 1)
Appendix E)
Information plates, full set
General Safety Instructions
Dry cleaning solvent P-D-680 used to clean parts is potentially dan-
gerous to personnel and property. Flash point of solvent is 100° to
138°F (38° to 59°C).
Avoid repeated and prolonged skin contact.
Do not use near open flame or excessive heat.
Location/Item
Action
Remarks
INSPECTION
1. Information
Inspect for missing or illegible plates, labels, and signs.
plates
Check against those shown in the illustrations.
SERVICE
Dry cleaning solvent P-D-680 used to clean parts is potentially dan-
gerous to personnel and property. Flash point of solvent is 100° to
138°F (38° to 59°C).
Avoid repeated and prolonged skin contact.
Do not use near open flame or excessive heat.
2.
Information
Clean information plates, labels, and signs with dry
plates
cleaning solvent. Where adhesive mounted labels are
loose, press on. If unable to make adhesive mounted
labels stick, completely remove old label, clean mount–
ing surface with solvent, and apply new label. If
riveted plates become loose, install with new rivets.
4-151
