TM 9-4520-258-14
4-17.
POWER CABLE ADAPTER CORD.
This task consists of:
Repair
INITIAL SETUP:
Tools:
Equipment Condition:
Tool Kit, General Mechanics (Item 1, App B)
Unit disconnected from power source (para 2-28)
Soldering Iron (Item 2, App B)
Tool Kit, Electrical Connector Repair (Item 2,
App B)
Material/Parts:
Wire tags (Item 9, App E)
Repair (Refer to Figure 4-14)
(1)
Remove adapter cord (1) from power cable (2).
(2)
Repair of cord consists of replacing damaged parts with new parts. If cord (1) is damaged, the
complete assembly must be replaced.
(3)
Cut strap (3) from connector plug (4) and remove cover assembly (5).
(4)
Remove two screws (6), two nuts (7) and two saddles (8).
(5)
Unscrew clamp (9) and slide clamp, grommet follower (10), grommet (11), and rubber bushing (12)
down on cord (1).
(6)
Unscrew sleeve (13) from connector plug (4) and down on cord (1).
(7)
Tag three wires (14), (15) and (16).
(8)
Cut connector plug (4) from cord (1).
(9)
Slide sleeve (13), bushing (12), grommet (11), grommet follower (10), and clamp (9) from cord (1).
(10)
Slide cable clamp (9), grommet follower (10), grommet (11), rubber bushing (12), and sleeve
assembly (13) on cord (1).
4-66
